The full version tutorial click DK-BL
How to use it with android phone!
>> Obtain a android phone with Bluetooth 4.0 or higher version.
>> Open the packaging, remove the fixed tape and pearl cotton on the machine.
>> Turn on the machine back power switch, At this point, the machine will do an automatic detection.if you turn on the bottom the machine not do an automatic detection, it maybe The machine have been dormant, this moment, press the red bottom(At the top of the machine)to wake up the machine, If the reset function disable, it might root cause to machine in dormant stage or low power. Please charge the machine for 30minutes or press the red button on the top of machine to recover.
>> Adjust the focal length of the laser, factory default settings the focal length of the gray cardboard, there is no need to do any adjustment. If you need to carve the object in different thickness, you need to place the object in the engraving platform and adjust the focus manually, when in the first operation, it is recommended to use a gray cardboard (in the package list) to carve;
The method of adjust the focal length as follow:
Fixed the surface of the carved objects at the level of the bearing table, put on the focusing glasses( sent in random) (maybe will not adapt it at the beginning, just to be used as focus),rotate the focus head manually, shown in figure:
Step 2: Download Android APP
Or scan download:
Open bluetooth function in you phone "Setting":
Open software,and choose the device:
If the connection is successful, The blue light on the back of the motherboard will light up, and the software will show the connection successful and display the power:
Edit the content select pictures from the phone folder, take photos, or edit content:
Now we choose a picture, click "OK" , choose a efect(Software provides 2 image algorithms. One is to maintain the image of the original appearance , It's suitable for the photo with good shot. The other is for taking photo. You can choose whatever effect you want),
Click send photos to the machine and wait about 20 seconds, The blue light indicator at the side of the machine side be on, that means the photo is being transmitted.
the transmission light,Do not take the phone away during transmission!
How to use it with I-phone
This app for I-phone not yet perfect, since the compatibility issue btw Apple APP and bluethooth4.0.it will take longer time during Image transmission time (about 2 minutes). So we don't recommend transmit images using I-phone curving.
Prepare a ios9.0 or higher version mobile phone;
Set the machine into a standby mode, the method is same as the previous (reference page pc and android)
Step2: Download the software and turn on the Bluetooth function of the mobile phone
2-1. Apple Store search "NEJE", download and install
2-2. Turn on the Bluetooth function from the mobile phone system "Settings"
Step3. Run the software
As shown above
3-1., "Search" search machine, and make connection
3-2., "Photo" choose one of your pictures from the album, or take pictures, the software will default to cut into 550x550 pixels;
3-3., "Effect" software provides an image processing algorithm
3-4., "Send" send pictures to the machine, the time in 2-4 minutes, the function is not perfect, you can also skip directly to step5.
3-5., "Controller" control interface, positioning function, position adjustment, ignition timing adjustment, start engraving.
This saves the data to the local file system.